Anthony Vapes: Advken Manta RTA Review

Hi all, Anthony woozy back here with my Advken Manta RTA. Warning: This product was sent to me from elementvape.com

 

comments Disclaimer

I review the products for what they do not take into account where it comes from or who made it. The results of the test results for what is in my hands. Due to possible differences QC your experience may be different. I spent more time with the product and then most of the criticism and try to be thorough, making disassembly to check faulty design, test accuracy, and stress testing, which is usually done in the ‘care industry to try to “force” the failure diagnosis or potential failure point to give me an idea of ​​the life of the product. That said, there is no way to predict whether or device will last 6 months, 1 year, 5 years, etc. Each item is produced from cars to cell phones to computers pods may have arrived DOA or a small% failure rate. There is no way to predict or quantify it. That’s why there are guarantees and lemon laws. I can look at what I have in my hands for better or worse. Contrary to popular belief, there is no special review samples of top quality. Most of my personal time to get the commercial version, sometimes I get their initial version is usually worse than the final retail version.

 

Introduction:

Manta RDA is the last Advken. They are a company that has been around for a while, but with little fanfare. Most popular products, they can gorge mad hatter GDR and with a gap on the hinge for easy filling. Manta part double coil air flow RTA with a capacity of 4.5 ml with glass bubbles (or 3 ml of capacity with ordinary glass) and is available in 5 colors, black, SS, rainbow, blue, and gold.

 

Manufacturer Specifications

Staniless 24mm stainless construction

Double gold plated curve Post and Central Bridge Section Section
Top System Re-filling
adjusting tri-water-holes System
510 wire and gold plated Pin Contact
Chubby normal standard tube spare glass and glass tubes
4.5ml / 3ml capacity According Choice tube
Coming up with a screwdriver and Confederate Bag
Standard Gift Box Package
Included in the box
1 Manta 24mm RTA
Extensions 1 Glass Bubble
1 Doctor screwdriver coil
Spare parts and O-rings

First impressions and characteristics
When I arrived this RTA I was very impressed by the performance and quality of it. A gold was only an impressive finish to it. The thread and the O-rings are really good. No O-ring sticking or damage to the glass to disassemble. air flow by using three separate holes instead of a large on each side. Ideal for people who want to lose air. It is a little tight but and it can be difficult to adjust in the mod.

Deck Construction (photos above)
Let’s talk now to build a platform. It is rather the style rhythm as in the second holes after 2 bridge by post but with more metal in it. Each lead has got the hole itself was always good and it is easy to build one. They use the hexagon socket of good quality which is my favorite. It also has some extra metal between the coils with a hole. conditioned air flow is downwards with two relatively small holes in the bottom of each coil. platform, it is very easy to align your reel on the air flow but do not have a lot of space in it. It is more suited to lower power smaller construction. I found 3 mm max be fit there and 2.5mm also works very well. Overall easy to build a platform made for a small construction

Wicking is also easy. This is a GTA-style platform is really low down. No JFC and no leakage. It was quite forgive, but you want to use a lot of cotton. Not too much throttle, but enough to fill all the slots with a cotton tip flush on the bottom. You should be able to adjust your tweezers easily between cotton and filling holes that are small enough. I found the coil 2.5mm You do not need your slim prospects at all. With the son of 3 mm reel you want to lighten a little.

success

Performance wise, I use it as a double coil RTA only as intended. I ran three building luxury coil through it in the range of 5-6 packs of 3 mm and 2.5 mm ID. I also ran 2 rounds of simple construction with 26 envelopes of measuring instruments 8-9 Nichrome 1 mm ID 3 and 1 in the 2.5mm ID. Overall, I find that it works well with everyone to build. It is quite flexible and does not need anything fancy to taste good but I would stick with either 3 mm diameter 2.5mm ID or ID of the coil. There is plenty of space for a large building, it is best to use in the range of 40-70 watts. I would not take much more than that. That said, I get a very good sense. This figure is higher than the average TSR average watts. I feel I’ve done the best construction for the taste is luxurious 5 reel film run 2.5mm ID TC 60 watts.

Overall impressions, Details and Extras
This is the bottom of the RTA and the AFC air flow is smooth, but a little tight and the cap. glass bubble, it is difficult to adjust when he was in the mod, but easy to adjust when mod. It has complete high level where you unscrew the lid and expose two large filling holes. top hat has a textured design as well and is easy to grip and open the cover. It is easy to fill all kinds of bottles or just poured juice. I used the 70/30, 80/20 and juice “max VG” in it without problem. It comes with a standard 810 point drops manta Ultem and wrote on it. It is really good and easy to disassemble with minimal parts to it. All nice and smooth thread. It is the RTA diameter of 24mm should therefore not wrong on most mods. 4.5ml capacity is quite good with a glass bubble for tanks that do not really drink juice.

pro:
manufacturing quality
visible

color selection
Tip 810 standard
build a bridge and posts good quality screws
marquee filling design
above the average for the direction RTA mid watt
4.5ml capacity
The inconvenients:
Build a platform is limited to the coil size
AFC difficult to adjust when mod
Conclusion
So with all that said, I recommend the RTA? I do not like to or not difficult, but it will lean slightly toward yes but with a caveat was added to the average VAPERS watts. If you want VAPE over 70 watts is not for you. If you want VAPE 40-70 watts and does not blow the juice and still get a good sense, it is a very good choice. It will not make my top list, but it is still good enough dam RTA. I’ll add to my list

It can be purchased here Manta 24mm TSR Advken | Staggered two Design Post at 32.95

It was Anthony fried keep only honest, I hope you can all say the same thing and I’ll catch you at the next review.

For a good recommendation please check my Google sheet located here

This sheet will be updated regularly so feel free to bookmark it.

Once again I want to thank you for sending me this elementvape.com for the purposes of this review

Also if you missed some of my past reviews you can find it here Save Me