In summary and evaluation
Propel is a very good entry into the Smoant Pasito Vape Pod System And the best thing I’ve tasted to date, Replacement RBA Coil Head it even better. A reference that will take some beating – A must buy.
Ranking 9/10 – Game Changer
The highest value that can give because I do not believe in 10/10. Perfection is subjective.
POD / AIO / MOD ??? – opaque line
I put this in the category of the IOA, but technically can be classified tanks and drums MOD changes. Line with fuzzy pods evolution, leading to devices like Propel – Catfart calls for all I care! It is a compact spray device and I love the way the market is growing.
Propel feature-rich for such a small device, here are some of them:
content and the content of the box
Early on, you know you have something special; box is one of the best packages that I have seen used with magnetic flap folds to reveal a double, which in turn reveals Propel. Therefore, there is information printed on the flaps and housing with a USB cable C is accepted, the additional coil and some cards do not bother to read (but not).
Most impressive of all, even if it would be better if you include the RBA.
1 x mod Propel
1 x cartridge Propel
1 x Ni-coil 80 MTL 1.4Ω
1 x DTL mesh coil 0.6Ω
Cable Type 1 x load C
± 1 x coil
Card 1 x Certificate
Warranty Card x 1
1 x User
A good first impression with the opening of containers, goods have Pasito! There is a nice little game is a solid, well designed, and the magnetic connection is made to remove and replace favorable winds. The style has met a mixed reception, which I personally like. Smoant the following claims:
“ROE INNOVATIVE TECHNOLOGY
CPR is used as a design material end product more beautiful and durable color. No fingerprint. “
grandma hand, I do not know CPR?
printed colored resin?
urine reaction of cow?
My best guess is the second choice, but who knows? Additionally, Smoant Pasito II Pod Kit reacted and released a stylish addition to the carbon fiber should meet the enemy. Have time to be admired mod, I put it on charge faster and C friendly with USB cable. Then I begin the coil to the nacelle. He pulled out of the base, then simply unscrew the coil connector, very easy. Then I primed coil with a few drops of my favorite Nic juice Salt and screwed back and pushed together.
Propel does not ignore one of the most desirable features of an AIO, and the air flow adjusted. cursor a little uncomfortable at the top of the gondola is. MTL layer (the mouth of the lungs) and DTL (lung Direct). Although a little checklist to solve, are welcome features and benefits for me. Not the size of the smallest, but still compact and easy pocket either:
Features, comment and operating coil
On the one hand, a shutter button, control and port USB-C power. Interestingly voluntary shot button, which is unusual in the beginning, but I quickly got used to me. I find it easy to shoot some point waiting with fingers or thumb, a place that has never been highlighted “pockets of fire” and have high strength. Button 5 power settings to adjust the power level of fine disc, the power levels appropriate for me to lower, but they are heated to improve vaporiser:
Replacement MTL-Ni80 Coil Head.
Basically, there are many on the opposite side ventilation holes to empty the shutter button, the rear panel is simply a function without CPR. CPR before two separate panels, one on top of the light emitting diode 5 which is used for various functions:
power level – click on the desired improvement and see all the points of light accordingly.
Battery Status – press the shutter button five lights flash at full load and reduce the number of points are displayed as the battery level is reduced.
battery levels – Each point reflects the level of load: 20% – 40% – 60% – 80% – 100%
Pressing the shutter button five times to put the unit in standby and back 5 clicks.
That’s all there is to it, is very intuitive and easy to use. As mentioned above, the car has a magnetic connection and loosens easily but still adhere. Unleash hell and will probably remain in place.
“Pod” has a cartridge drops sliding properties to the end, which can be substituted with other suggestions Propel. boring is a commitment to meet the needs of MTL and DTL and to be honest, it was very good for both of them. There is a small plastic slider to control the flow of air, wide open to attract a tight DTL, MTL almost closed provide a very good draw.
battery life is very good and much better than expected with a battery of 1100 mAh, and the cost is also very fast, even at the price of 1 ampere. Which should last a day on moderate use.
MTL: 1.4ohm coil Ni-80,
DTL: 0.6ohm DTL mesh coil,
Charon Baby Pod System Starter Kit
It may seem boring, but it’s pretty easy to get to the coils. Waiting on the bridge and prefolding legs to match the holes in the two positions. With the lower coil legs, the first entry is easy, but the second requires a little more attention, use only a small pair of pliers and insert the tip of the needle around. slightly lower threaded pin, not too tight, you have to throw the leg with forceps, and after being satisfied with the position that can tighten the screws (perhaps with coils 2.5 mm rod). This will damage the bit if the rod coil pinch and pull to remove the air flow and writing, then dried and pressed register shaped ceramic tweezers to remove the access point. Checking Ohm stability and no shorts (mine is 1.4 ohms), you are ready for the shaft.
Cut a strip of approximately 6 mm wide axis and remove the thin skin on both sides (also not remove) a loose roller, then press one end of the wire through the coil you. I found the strip through with some tension at both ends help maintain the coil shape. I had to survive with little resistance. If it is too tight, it will be examined more coils means that there is too much cotton. Cut to length, should reach just below the base, then slimmed down a little trick. Then, spindle and shaft juice (about 8 watts added pulse when the juice) and the foot when wet, should be comfortable in a circular groove Meta. Finally, screw in the manufacture of brand fireplace careful not to slip cotton yarn.
All that remains to do is remove the base 510 and the screws on the bottom of your rolls propulsion makes the job!
In the like many, but it took a few minutes total.
If you still are not sure then YouTube is your friend, find the “Pasito Smoant RBA.”
So installed Propel RBA coil cartridges, refilled and tested. Not expecting much, I was surprised how great frikkin taste, especially with my first weird construction! They smoant highlighted in R & D of the whole package. Although a large roll of values, just use RBA now my skills have improved with each generation, I really liked the development of RBA. It is much easier than many MTL RTA is mine.
Well, if you’ve read this far (well done), you see I’m in love with these AIO devices, especially with outstanding RBA. I arrived at the advantages and disadvantages soon and I will fight with the inconvenience!
It would be better if they included the RBA, but, to be fair, for the price was an incredible deal and I appreciate all the love in the world, does not build its own coil that is understandable remove PVT RBA maintained.
I tried and many teeth and AIO Smoat Pasitio too, but in their own league and it will be a tough act to follow. And others to follow, and more devices RBA or a selection of nearby which is a positive development. “Fire and forget” pods still have their place and can see that the market is fragmented, but Pasito a reference and if the new device happier late! Meanwhile, I am more than satisfied.
I would buy it again if I lost or broke – I have an “alternative” and that the RBA buy 100% YES.
pros and cons
The first contact with the market.
coil is a very good value.
Easy to use.
Packaging and presentation is the best I’ve seen.
RBA excellent choice.
The battery life.
Tank 3 ml (2 ml TPD).
Cons … .. eh …….
Love or hate model.
RBA is not included.
More than most.
DTL little too tight.
I do not know what CPR.
the box was too good to throw away.
I thought I would give