Comment on the Smok tanks Nord pods RPM Pro mag grip trinity alpha nfix

I received a kit Morph smok nord2 pods the purposes of this review.

Smok morphing color:

– Black gold
– 7 colors and black
– Red Black
– Blue and Black Prisma
– black and chrome prism

Description and features:

– Morph Mod 219 size – 44.8mm x 30.2mm x 84.5mm
– Battery Type: 18650 dual battery (not included)
– Power range: 1 W-219W
– Display: touch screen 1.9 ”
– Input voltage: 6.4V 8.4V-
– Output voltage: 0.5V-8.2V
– Cooking time: 0.001s
– Charging Current: 1.8A
– Charging voltage: 5V
– Resistance Range: 0.1-2.5ohm (VW) /0.05-2.0ohm (TC)
– Temperature: 200-600 ℉ / ℃ 100-315
TF tank size -: 25.5 mm x 56 mm
– Tank capacity: 6 ml
– Discussions: Discussions 510

In the frame:

– Morph SMOK RPM 80 Pro

– 6 ml Smok tank TF

– Smok TF BF-Mesh 0.25ohm tank coil (pre-installed)

– 0.25ohm Smok TF BF-Mesh tank coil

– silicone protective glass bulb

– glass tubes Replacedment

– USB Cable

– User’s Guide

– Bedrooms

 

Smok tank tf:

 

Tf is 56 ohm smok mag grip mm high and is 25.5mm in diameter.

In the package with the atomizer you will receive a glass tank and tank flat glass bubbles were very good, also received a glass tank silicone protective and two coils. atomizer good quality of construction, the cable is good and everything is as it should be. Previously you could see atomizer “Smok” and the bottom of the atomizer atomizer can see “Designed by Smok”, you can buy 5 different colors.

Atomizer equipped with a drip edge 510 pre-installed, so that the atomizer can be used other end 510 reduction if it did. Drop by drop-off points are pre installed very nice and I think it is convenient to use. I think it’s great that finally made the atomizer 510 is supported, but for some people would be better than the atomizer is compatible with 810 drip tips, however, advanced packaging drops are very comfortable and good looking.

This is a high-filling syringes. Before you can see the key press atomizer to install. When the top cover is pressed, you can view the contents of the hole. Comply with large holes and the atomizer can be filled without problems, so basically, filling here is very simple and can be filled atomizer very fast. More filling works well and should not leak when a sprinkler system is required.
glass syringes fitted with a bubble tank and pre-installed on the box will receive the usual glass tank. atomizer tank with a capacity of ordinary glass is a tank capacity of glass bubbles 2 ml and 6 ml capacity is very good and I think many people like reservoir capacity. With the atomizer receive a silicone protective glass for the tank to protect the tank in case you drop, very good in my opinion.

Using the spraying which receives two rollers and two coils of the same. Bf mesh coil is coil and its 0.25ohm resistance, it is recommended to power the coil is 30-80w 60-70w and better jobs. It can be very easy to change the coil atomizer, you have to do is press the atomizer coil is very easy and simple. When the coil is used first, it must be primed with a few drops and can be inserted into the atomizer and filled syringe.

Basically, you can see the ring control air flow and the ring can be seen two slots airflow. ring control air flow, which has some details that helps when you want to adjust the air flow, so you can more easily adjust more or airflow and allows you to leave out is the same side Oher.

How does it work? Atomizer and my mind:

build quality of the atomizer is very good, everything is as it should be. It comes with sophisticated drops 510 installed very good because it can use a spray tip 510 drops. Falling drop that comes pre-installed my opinion is comfortable to use. 810 atomzier be more compatible with drops of advice, so this could be a disadvantage for some people. The system is very easy to complete and can fill up fast, so far, works well. The capacity of the container is 2 ml glass standard, but with a very good bubble tank capacity glass capacity of 6 ml. In this package, we received a silicone protector for your tank that was really good. You really can easily replace the spool into the atomizer and the atomizer, you receive two coils. Atomzier work very good, taste good and also steam, this is not the best there is a detection coil is certainly better than many who have tried to mesh aerosols, but. Therefore, the deposit is tf solid deposits in ohms, it worked well and was very easy to use.

Drawbacks:

 

– Not compatible with 810 drip tips

 

 

 

Pro:

 

– The build quality is good

– easy to fill

– Compatible with 510 drip points

– comfortable drop points fall preinstalled

– 6 ml capacity tank bubbles

– Protective silicone

– The good taste

– Two coils in the package

– Easy to replace the coil

smok trinity alpha tank is powered by two batteries 18650 and this model works 1-219w. You can buy this model in 5 different colors.

This model is 44.8mm x 84.5mm x 30.2mm dimensions are. mod good build quality, everything is as it should be. This mod design is very good in my opinion, received a blue mod and you can tell the beautiful paintings. The device is very comfortable to use, with no sharp edges and large shutter button, because it feels very nice in the hand. Faced with this mod you can see “Smok” and behind the mod, you can see the “Morph”. This model has a touch screen that I really like and also supports multiple modes mod that can be used.
From the top you can see the connection mod and here we have a spring pin gold plated. Put here well and I had no problems with atomizers I speak here. Good connections, which rose slightly, which is good because you do not scratch the Ministry of Defense with atomizers. In this mod, you can use the aerosol up to 26 mm, which is more than was good for me.

Under the mod you can see the battery cover. I really like the battery cover locking mechanism. When the battery cover is open, you can see how the mod mod painting batteries and is powered by two batteries 18650. So far I have not had a problem with the battery cover. When the battery mod mod noise and when there is a good rattle.

 

On one side of the mod, you can see the shutter button. The trigger is great and really the trigger. shutter button is very convenient to use, is a dislocation and works very well. At the top you can see the shutter button and a button using this button, you can lock the screen or off screen. When you press the screen lock button and the click of a button, you can turn off the screen.

 

In front of the mod, you can see the screen and USB.
You can use the USB port for software updates or to charge half the load balancer, but as usual, I recommend to recharge the batteries in an external charger.
In this device, we have a color display screen is excellent, large, the size of the screen is the 1.9inch screen and in my opinion, this device looks very nice and it was really the touch screen.

To activate it, you must click the trigger five times and had to do the same to turn it off. When the device is in power screen mode, you’ll see:

– I can not
– locking / unlocking
– Time Hojaldre
– W
– Heat
– Left and right
– Resistance
– V
– against cerebrovascular accidents
– AN
– The battery indicator

The touch screen works well and so far I have not had a problem with the display. Also on display, you can see everything nice and a very good screen brightness.
Enter in the menu, you can see:

– Modus
– My Style
– Hojaldre
– Set

When the mode is selected, you can choose different modes:

– Watt
– temperature Ti
– Temperature Ni
– Temperature Ss

If you choose me mode, you can set up four different operating modes, and you can adjust your diet, you can pre-heat and add liquid name and network cards.
If you choose Puff Puff, you can rearrange the tables.
You can see the set included:
– General (of the factory, accessibility, food)
– Chip (Info)
– topics
– Access codes

 

If you choose a theme, you can choose a different background and you can choose different colors on the screen and can also set the screen timeout. If you choose an access code, you can set your own password, the device asks every time the battery is placed in a mod.

 

How do these devices work and my thoughts:

smok nfix pods is very good in my opinion, and certainly one of the best mods out there,

I really like the color blue. mod good quality construction and complain about this mod. Chateo also looks good, but I have to say that this magnet fingerprints mod will be a loss for someone. In the device it can be used for a diameter of 26 mm without good atomziers projection. You really can be easy to put the battery in the Ministry of Defense and the extent to DIND’T have a problem with the battery cover. Rattle nothing when shaken battery and when morning. large shutter button and I really like the type of shutter button. It works well and dislocation. It’s also good to have a key to lock / unlock the screen and enable / disable screen. This model also supports load balancing, but as always recommended to charge your batteries in an external charger. Really beautiful screen and on the screen, we have all the information we need, big screen, the screen brightness is good and works well. I also like that we can change the color of the screen. This device has many options yet very easy to use. Mod works very well if you ask me, I tried with my MTL and atomizers me and runs smoothly DTL and will probably continue to use the device every day. If you are considering buying this mod and mod design you want, I can tell you all that this camera can be obtained safely.

 

deficiency:

– fingerprint magnet

 

Pro:

– Good build quality
– Good design
– Jack Good
– it can be used up to 26 mm diameter without false atomizers
– Binding slightly
– comfortable to use
– cozy fire button
– Screen Buttons
– a beautiful and big screen
– a good screen brightness
– Much of the information on the screen
– Easy to use
– The screen works well
– Theme Options
– balanced load
– the battery cover is working well
– My selection method
– Password Option
– No ring

 

sourcemore thanks
You can buy the kit here: Smok complete Morph

You can buy tanks: smok tanks